lamps. Sunday , January 29th , 2017 - 14:50:16 PM
Standard lightings in households had several serious troubles. Be it difficulties o modifying them or dim shine they presented or the amount of energy ineffective they were : there were a good amount of reasons why home-owners would be annoyed. Nobody needs to pay significant electricity bills all things considered and staying energy dysfunctional meant staying more environment harmful also.
Take 3 hanger pieces which have been put to the same measurement. Taking a separate hanger bend it to the shape of a small circular, large enough to rest on the bulb rim. You can attach these by using thick wire and then attach it to the lower rim. Then place it on the blub rim. Make sure it is properly balanced. Now take the mica sheets and drill small holes in the corners each sheets (4 holes). Taking 3 inch sections of craft wire attach the mica to the rims, both up and down. Check if it is firmly placed. And now you have your very own home made mica lamp shade. You can use stencils and paint on your lampshade to add a little bit of color if you desire.
Then I reach the isle with the lamp shades. I see a shade that is $15 and would look great with the new design of my room. So an easy and cheap way to upgrade is to change shades. A few things to keep in mind is the hardware on your old lamp. Some shades (usually smaller) fit over the bulb. But most table lamps have a bracket that surrounds the bulb and goes to a point were a bolt is extended at the top. The shade will have an eyelet at the top that will slide over the lamp bolt and a decorative nut secures it to the lamp.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does Title claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.