lamps. Monday , May 15th , 2017 - 23:50:21 PM
You need to make your post lamp a "smart post lamp." Find the wall switch that controls the post lamp. Replace it with smart switch module. You can still turn it on and off by pushing the switch. But now you can also send a remote command to control the switch. You need a "controller" module that will send your command to your smart switch. If you already have a home wireless network and Internet service, find a wall outlet near your router. Connect the router to the controller using an Ethernet cable. Plug the controller module into the wall outlet and you're ready to go.
1. High initial cost. This is probably the main deterrent for people when it comes to adopting solar street lighting. The cost can be quite significant especially when replacing lights that run on electricity from the power grid. However, once seen from a long-term standpoint, the potential savings from using solar street lights far outweigh the initial costs.
The traditional way to carve a jack-o-lantern is to do it freehand. There isn't a stencil in sight. You'll need the right kind of pumpkin and a handful of tools. Once you're done, all you'll need is the lighting.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does Title claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.